Skip to main content

LixelStudio Manual · v4.1.1.0 · Page 7 of 11

2D Drawing

This chapter covers the 2D vector drawing tools, including AI extraction, drawing primitives, and editing operations.

Draw

Enter 2D drawing mode.

  1. Select the point cloud.
  2. Click Drawing .

Toolbar:

IconButtonFunction
Previous Step (Undo)Undo the most recent drawing
Next Step (Redo)Redo the most recent undo
Polygon SelectionDraw a polygon to select vectors
MidpointSnap to a vector midpoint when drawing
EndpointSnap to a vector endpoint when drawing
IntersectionSnap to an intersection or extended intersection
Perpendicular PointSnap to the perpendicular foot from the previous point
Graphic PointSnap to any point on a vector
Center PointSnap to the center of circles, arcs, and quadrilaterals
Orthogonal DrawingConstrain drawing to vertical/horizontal
Polar TrackingAuto-display fixed angles when drawing

Save

Save the drawing results to a .dxf file.

Export

Export the drawing result .dxf to a selected directory.

Exit

Exit the drawing state.

AI-Extract

Automatically fit and extract 2D vector contours from the point cloud.

  1. Click AI-Extract.
  2. Set the parameters. Advanced settings can be expanded.
  3. Click Confirm to complete the extraction.
ParameterDescription
Exterior Wall ThicknessSets the exterior wall thickness
Generate Dimension AnnotationsAutomatically generates dimension annotations when enabled
Door and Window DetectionDetects doors and windows based on the points of interest set during capture

Note: Door and window detection only supports raw project data and post-processed result data.

Line

Draw a line with two points.

  1. Click Line .
  2. Left-click to specify the start point.
  3. Left-click to specify the end point.

Polyline

Connect multiple points to form a polyline.

  1. Click Polyline .
  2. Left-click to specify the start point.
  3. Left-click to specify subsequent points.
  4. Right-click to end.

Arc

Draw an arc with three points.

  1. Click Arc .
  2. Left-click to specify the start point.
  3. Left-click to specify the second point and the end point in sequence.

Three-Point Rectangle

Draw a rectangle through three points (the first two determine one side, the third determines the opposite side position).

  1. Click Three-Point Rectangle .
  2. Left-click to specify the first, second, and third points in sequence.

Two-Point Rectangle

Draw a rectangle through two diagonal points.

  1. Click Two-Point Rectangle .
  2. Left-click to specify the first and second points.

Three-Point Circle

Determine a circle's position and size through three points on the circle.

  1. Click Three-Point Circle Three-point circle.
  2. Left-click to specify the first, second, and third points in sequence.

Two-Point Circle

Determine a circle's position and size through its diameter.

  1. Click Two-Point Circle .
  2. Left-click to specify the first point (one end of the diameter).
  3. Left-click to specify the second point (the other end of the diameter).

Center Circle

Draw a circle by specifying the center and radius.

  1. Click Center Circle .
  2. Left-click to specify the center position.
  3. Left-click to specify a point on the circle to determine the radius.

Extend

Extend a target linear entity to a reference entity boundary.

  1. Click Extend .
  2. Specify the target linear entity to extend.

Break

Break a linear entity at a specified point on the line.

  1. Click Break .
  2. Specify the point on the linear entity where you want to break it.

Merge

Merge two linear entities with connected vertices into one.

  1. Click Merge .
  2. Specify the first linear entity to merge.
  3. Specify the second linear entity connected to the first entity's vertices.

Trim

Trim a specified edge of a selected linear entity. The specified edge disappears; if the trim object has one line segment, it is deleted. When the trim edge intersects other entities, it precisely terminates them at the trim edge boundary.

  1. Click Trim .
  2. Specify the trim edge.

Intersect

Connect a linear entity with another linear entity.

  1. Click Intersect .
  2. Left-click to specify the first linear entity.
  3. Left-click to specify the second linear entity.

Clone

Clone selected entities and move them to a specified position. Copied entities move based on the distance and direction between the base point and the second point.

  1. Click Clone (or select entities first).
  2. Specify the entities to clone, then press Enter (skip if pre-selected).
  3. Specify the base point.
  4. Specify the second point. The copied entities move to the new position.

Move

Move selected entities to a new position. Objects move based on the distance and direction between the base point and the second point.

  1. Click Move (or select entities first).
  2. Specify the entities to move, then press Enter (skip if pre-selected).
  3. Specify the base point.
  4. Specify the second point. The objects move to the new position.

Delete

Delete specified entities.

  1. Select the entities to delete.
  2. Click Delete .

XGRIDS documentation, reproduced as published and captured on October 27, 2026. Read this page on docs.xgrids.com

Stuck on a Step?

QRC supports every scanner and software seat it sells. Send us the page you are on and we will walk you through it.

Contact Us
Request a Quote